API - Valve Standards
An overview of the American Petroleum Institute - API - valve standards
API SPEC 6D
Specification for Pipeline Valves. API Specification 6D is an adoption of ISO 14313: 1999, Petroleum and Natural Gas Industries-Pipeline Transportation Systems-Pipeline Valves. This International Standard specifies requirements and gives recommendations for the design, manufacturing, testing and documentation of ball, check, gate and plug valves for application in pipeline systems.
API 526
Flanged Steel Pressure Relief Valves. The standard is a purcha specification for flanged steel pressure relief valves. Basic requirements are given for direct spring-loaded pressure relief valves and pilot-operated pressure relief valves as follows: orifice designation and area; valve size and pressure rating, inlet and outlet; materials; pressure-temperature limits;
and center-to-face dimensions, inlet and outlet.
API 527
Seat Tightness of Pressure Relief Valves R(2002). Describes methods of determining the at tightness of metal- and soft-ated pressure relief valves, including tho of conventional, bellows, and pilot-operated designs.
ANSI/API STD 594
Check Valves: Flanged, Lug, Wafer and Butt-welding. API Standard 594 covers design, material, face-to-face dimensions, pressure-temperature ratings, and examination, inspection, and test requirements for two types of check valves.
API 598
Valve Inspection and Testing. The standard covers inspection, supplementary examination, and pressure test requirements for both resilient-ated and metal-to-metal
ated gate, globe, plug, ball, check, and butterfly valves. Pertains to inspection by the purchar and to any supplementary examinations the purchar may require at the valve manufacturer's plant.
ANSI/API 599
Metal Plug Valves - Flanged, Threaded and Welding Ends. A purcha specification that covers requirements for metal plug valves with flanged or butt-welding ends, and ductile iron plug valves with flanged ends, in sizes NPS 1 through NPS 24, which correspond to nominal pipe sizes in ASME B36.10M. Valve bodies conforming to ASME B16.34 may have flanged end and one butt-welding end. It also covers both lubricated and nonlubricated valves that have two-way coaxial ports, and includes requirements for valves fitted with internal body, plug, or port linings or applied hard facings on the body, body ports, plug, or plug port.
ANSI/API 600
Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries - Modified National Adoption of ISO 10434:1998.
API 602
Compact Steel Gate Valves - Flanged, Threaded, Welding, and Extended-Body Ends. The standard covers threaded-end, socket-welding-end, butt-welding-end, and flanged-end compact carbon steel gate valves in sizes NPS4 and smaller.
ANSI/API 603
Corrosion-Resistant, Bolted Bonnet Gate Valves - Flanged and Butt-Welding Ends. The standard covers corrosion-resistant bolted bonnet gate valves with flanged or butt-weld ends in sizes NPS 1/2 through 24, corresponding to nominal pipe sizes in ASME B36.10M, and Class 150, 300, and, 600, as specified in ASME B16.34.
ANSI/API 607
Fire Test for Soft-Seated Quarter Turn Valves. The standard covers the requirements for testing and evaluating the performance of straightway, soft-ated quarter-turn valves when the valves are expod to certain fire conditions defined in this standard. The procedures described in this standard apply to all class and sizes of such valves that are made of materials listed in ASME B16.34.
API 609
Butterfly Valves: Double Flanged, Lug- and Wafer-Type. The standard covers design, materials, face-to-face dimensions, pressure-temperature ratings, and examination, inspection, and test requirements for gray iron, ductile iron, bronze, steel, nickel-ba alloy, or special alloy butterfly valves that provide tight shutoff in the clod position and are suitable for flow regulation.
API 6FA
Specification for Fire Test for Valves. The standard covers the requirements for testing an
d evaluating the performance of API Spec 6A and Spec 6D valves when expod to specifically defined fire conditions.
API 6FC
Fire Test for Valve with Automatic Backats. The standard covers the requirements for testing and evaluating the performance of API Spec 6A and Spec 6D valves with automatic backats when expod to specifically defined fire conditions.
API 6RS
Referenced Standards for Committee 6, Standardization of Valves and Wellhead Equipment.
API 11V6
Design of Continuous Flow Gas Lift Installations Using Injection Pressure Operated Valves. The standard ts guidelines for continuous flow gas lift installation designs using injection pressure operated valves.
ANSI/API RP 11V7
