Purpo:
6级作文预测
目的 :
Instruct how to operate and u ISMECA NX-16 TAPING MACHINE and its Accessorial
NATIVE VISION SYSTEM
说明如何操作, 使用 ISMECA NX16 TAPING MACHINE 及其附属之 NATIVE VISION SYSTEM
1. Scope:
范围 :
Adapt for QFN 3x3/ 4x4/ 5x5 /6x6 devices
适用于所有 QFN 3x3/ 4x4/ 5x5 /6x6 产品
2. Reference:
参考资料 :
ISMECA NX16 Manual and Native Vision
3. Operation Procedure:
操作程序内容 :
3.1M/C Start procedures that will adapt to Bowl Feeder configuration:
开机程序 (以下步骤适用于 AGL/ Air Gun Loader 及 Bowl Feeder 架构):system engineering
3.1.1Switch on 3 from O → 1 position and check if Emergent Stop Switch is not activated
将电器箱旁之主电源旋钮 3“Main supply switch”由“O”旋旋至 “I” 位置，
检查控制面板上之急停开关是否有在拔出位置 (没被压下)。
3.1.2Switch on 4 “Single-pha supplies (ON/OFF) lector from O → I position and push button 2 “Start power
supply engaging button”.
辅料英语将此面板上之另外旋钮 4.“Single-pha supplies (ON/OFF) lector ”由“O”转至“ I ” 位置后再按下按钮
2.“Start power supply engaging button”。
3.1.3 While enters Window 2000, check for below important parameters (M/C shall stop without operation).
待液晶控制面板进入Windows 2000画面，检查以下重要参数是否正确 (机台静止未激活) 。
项目设定值
Item Parameter
压缩空气气压:
5.6 ~ 6 Mpa (BAR)
Compresd air
真空气压
- 0.4 ~ -0.9 Mpa (BAR)
Vacuum pressure
万象城地址Sealing 温度
230 (225 ~ 235)。C
Sealing temperature
Sealing 压力
0.215 (0.210 ~ 0.220) Mpa (BAR)
Sealing pressure
dango
1 压缩空气压力计 and
2 真空压力计
Sealing 温度控制器 Sealing 压力计
英语六级成绩查询忘记准考证号3.1.4 Apply LOGIN to access operator level, password is not needed, then enter “OK” to access the operation
level.
使用 LOG IN 去登录到 “ Operator Level “, “ Password “ 为空白 (不需 Password )，接着按 “OK “ 即进入
一般生产线操作之等级。
gpa是什么意思3.1.5 Enter Recipes and check if the “Layout management “ lection is correct. It is Bowl feeder or AGL (Air
Gun Loader) configuration.
进入 Recipes → “ Layout management “ 去查看要使用的输入装置是否正确，Bowl Feeder 或是 AGL (Air
Gun Loader，使用在塑料管输入)。
The Layout change is only allowed to execute after the REEL is completed, go to
christmas carolJobs →QUIT PRODUCTION, then return to Recipes → “Layout management “
→ Load, to lect the right input Layout.
若要切换，需于完成 REEL 后，到Jobs →QUIT PRODUCTION 后，回到 Recipes →
“ Layout management “→ Load 去选择要使用的输入装置。
honorific
Afterward, enter Recipes → “ Recipe management “ → enter Load to lect right handler program for different package.
再进入Recipes → “ Recipe management “ →Load，选择正确机台程序来跑不同产品。
After lection, go to Recipes → “ Items “→ “ View “, to check three Vision functions, if
Have been activated or deactivated correctly.
选择后，可至 Recipes → “ Items “→ “ View “，去检查三个 “ VISION MARK “，
“ VISION LEAD “，” VISION IN TAPE “ 是否有正确开启或 “ VISION LEAD “ 有被
关闭。软件开发培训班
3.1.6 Enter Alarms screen, lect upper side List and right side SCROLL, and NEXT to Ret all errors (while
the SCROLL can not work properly), or just lect the error one by one and ret it directly.
按下液晶触控面板下方之 Alarms 触控按钮进入操作画面，选择上方 List 及右边 SCROLL， NEXT (当
SCROLL 无法作动时用) 触控按钮或是直接点选错误项目及连续按控制面板上之 RESET 按钮开关去重设问题位置。
