超导磁体电源

更新时间:2023-07-26 19:36:25 阅读: 评论:0

M o d e l  430 P o w e r  S u p p l y  P r o g r a m m e r  S p e c i f i c a t i o n s  f o r  A M I ’s  S t a n d a r d  S y s t e m s  @ 25o C
polyethyleneStandard Model 430 Configurations:  Programmable Limits
Magnet Current Control Parameter
±5 A
±10 A +100 A ±125 A +200 A ±250 A +300 A +500 A
Accuracy a  (A) with Standard Shunt System: 0.002 0.004 0.04 0.05 0.08 0.1 n/a b
n/a b
Accuracy c
(A) - High Stability System: 0.00025
0.0005 0.005 0.0063 0.01 0.0125 0.015 0.025
Stability a
抽噎
(A)  with Standard Shunt System: 0.001d
0.002d
0.02d
0.025d
0.04d
0.05d
n/a b
n/a b
Stability c
(A) - High Stability System: 0.00005
0.0001 0.001 0.001250.002 0.0025 0.003 0.005 Minimum Ramp Rate (mA/min): 0.01 0.01 0.01 0.1 0.1 0.1 0.1 0.1 Maximum Ramp Rate (A/c):
1
1
1
10
20
20
30
30
a
After 20 minutes; stability and accuracy of systems 250 A and less b
are improved more than a factor of 10 with the optional high-stability (flux-gate) system.
b
Systems larger than 250 A include the high stability (flux-gate) option as the standard configuration. c After 10 minutes;    d Drift is further reduced to half that shown after 60 minutes.
Model 430 Power Supply Programmer
and
Integrated  Magnet Power Supply Systems
Shown here:  AMI’s most popular Magnet Power  Supply System, the Model 4Q06125PS-430
Model 430 Programmer
Integrated Power Supply Systems
The AMI Model 430 Power Supply Programmer is a sophisticated digital power supply controller that allows an operator to manage a superconducting magnet system with unprecedented accuracy and
ea. The Model 430 is designed to control a wide range of single, dual, and four-quadrant linear and switching power supplies. The most frequently ud functions are accessible via single keystroke or shift plus keystroke. For other functions, a menu driven format guides the ur to enter inputs using the push button front panel interface.
AMI Integrated Magnet Power Supply Systems incorporate the digitally bad Model 430 Power Supply Programmer which provides simplified, flexible operation with preci low drift magnet current control. Standard systems are mounted in rugged 19” rack-style cabinets. Standard 4-quadrant systems range from 5 A to 250 A, while the standard bipolar current ratings range from 100 A to 500 A. Bipolar systems incorporate the AMI Model 601 Energy Absorber to achieve bipolar operation and allow fast ramp down with a unipolar power supply.
Multi-axis Systems
Multiple Model 430 Power Supply Programmers can control a multi-axis magnet system for virtual rotation of the magnetic field. An infinite combination of field vectors is possible when the coils of the multi-axis magnet system are energized and controlled independently and simultaneously.
Model 430 Features
•Parameter for tting persistent switch cool time1
•Ultrahigh resolution and accuracy
•Intuitive ur operation and comprehensive manual2
•Upper current limit and voltage limit ttings
•Easy to read digital V m/V s (magnet and supply voltage) display meter
端午节的英文•Can automatically determine inductance of load
•Drivers for LabView
•Ur-adjustable threshold quench detection with detection I/O
•Galvanically isolated Program Output signal to prevent ground loops
•Multifunction vacuum fluorescent display (VFD)
近道抄出命
•Menu driven ur interface and keypad – logical and intuitive
•One touch Ramp/Pau button
金银岛•Digital readout in Field (kilogauss or Tesla) or Current (Amperes)
•Control multiple parallel or ries configured supplies
•Front panel indication that current is flowing in magnet leads
•Velocity nsitive encoder dial for fine adjustments
•Programmable piecewi-continuous ramping with 10 current-
dependent rates
•I ntegrated DB-25 magnet
station connector with wired
DB-25 output signals available
for other system devices
•Built-in Ethernet and RS-2323 communication interfaces
•Ethernet port allows access to the Programmer across a local network or via the Internet
•Operating software is stored in flash memory and can easily be updated via the Ethernet or RS-232 ports
1Important for conduction-cooled magnets (dry switch) when a relatively long time is required to cool as compared with wet switches.
2Manual is conveniently available in the Model 430 firmware (pdf format) - just access the instrument’s IP address via a web browr.
3An optional external conversion unit is available for interfacing the RS-232 rial port to a GPIB bus.
Simplified Operation
Most frequently ud functions are accessible via single keystroke or shift plus keystroke. The front panel velocity-accelerated rotary encoder dial also allows the operator to make fine adjustments to operating parameters of the magnet system. Magnet system signal wiring, such as magnet voltage/current, helium levels, and temperatures, connect to the rear panel through a single DB-25 c
onnector. Multiple connectors on the rear panel allow the ur to route the signals to the appropriate instruments at the control station; the need for complicated wiring between the cryostat and magnet control station is thus eliminated.
Digital Control
The digitally-bad Model 430 incorporates very high resolution analog <> digital converters and digital signal processing (DSP) to achieve excellent stability, preci control, and superior current resolution of the programmed magnetic field. An internal microcomputer manages all computations, analog data conversion, display/keypad functions, communications I/O, and analog power supply programming signals.
High Resolution and Stability
Precision instrumentation techniques and potentiometer-free designs are employed throughout the instrument to ensure accurate signal translation for a wide range of conditions. The magnet current is sampled at a resolution of 15.6 µA (for a 125 A supply) and is front-panel programmable in 0.1 mA increments. A further order of magnitude in accuracy and stability can be achieved by choosing the optional fluxgate bad current measurement system in place of the standard resistive shunt.
Magnet Control and Protection
The Model 430 protects the magnet from runaway supply voltage/current or operator error. The quench detect function, with ur-adjustable quench nsitivity, is designed to detect a magnet quench and quickly stop power from being delivered to the resistive magnet. The system can optionally incorporate an AMI Liquid Helium (LHe) Level Instrument to prevent magnet quenching due to low LHe level; automatic ramp down of the magnet (even in persistent mode) is initiated if the LHe level drops to a pret level.
A system administrator can program the instrument (from the front panel or remotely) with password protected operational limits or any other parameter(s) which can thereafter not be exceeded or changed without the password. During operation of the system, if the operator inadvertently attempts to take the magnet system to an excessive magnetic field strength or excessive voltage, the Programmer will not accept the parameter and will alert the operator that the value exceed the limits.
The Model 430 automatically determines and ts the proper persistent switch heater current (range: 0 to 100 mA; compliance 13.5 V). The persistent switch heater circuit is continually monitored and the ur is notified of circuit problems. The Model 430 Programmer automatically controls the power
supply and persistent switch heater to aid the ur in safe and quick transitions in and out of persistent mode.
For single quadrant operation (I+, V+) the Model 430
Programmer can control various unipolar switching or linear
supplies. Shown here is the AMI Model 08150PS-430 1200 watt
switching supply combination. This system offers great value,
落后的英文
small size, and minimum heat generation. The Model 430
Programmer has also been tested on older supplies such as the
HP6260B linear power supply; it can breathe new life into your
system by offering state of the art control capability.
Bipolar operation (I+, V-/+) is obtained by adding a Model 601
Energy Absorber unit to take full advantage of programmed
magnetic field profiles, and other situations requiring fast ramp
培训美发学校down rates.
AMI’s lowest-power standard bipolar power supply system, designated 05100PS-430-601, has the Model 08150PS configured at 100 A/ 10 V, and in conjunction with the Model 601, supplies 100 A at 5 V to the load. The system comes mounted in a 19” rack style cabinet. Specifications for this and other standard AMI bipolar systems are outlined below. AMI’s highest-power standard bipolar power supply system, the Model 05500PS-430-601, is pictured on the last page of this brochure. Other ratings and configurations are available.
Specifications – Standard Cabinet Mounted Bipolar Power Supply Systems System
Maximum
Current
Maximum
Voltage
Output
Power
Maximum
Input Power a
Typical
Noi
Dimensions b
h x w x d
Approximate
Weight c 05100PS-430-601: +100 A ±5 Vdc 500 VA 1500 VA 75 mV p-p 12.5" x 21.0" x 24.5" 70 lb (32 kg)安静的英文歌
05200PS-430-601: +200 A ±5 Vdc 1000 VA 3000 VA 75 mV p-p 25.0" x 23.6" x 23.6" 165 lb (75 kg) 05300PS-430-601: +300 A ±5 Vdc 1500 VA 4500 VA 75 mV p-p 30.3" x 23.6" x 23.6" 215 lb (98 kg) 05500PS-430-601: +500 A ±5 Vdc 2500 VA 7250 VA 75 mV p-p 47.2" x 21.3" x 24.5" 330 lb (150 kg)
a Includes Model 430 and Model 601 b
Rack/cabinet dimensions; h = height; w = width; d = depth c Includes rack/cabinet
For true high-current four-quadrant operation (I+/-, V+/-) the Model
430 is configured with the Model 4Q06125PS Power Supply to
provide smooth, linear sweeps through zero current with constant
ramp rates across the entire operating range. The magnet system
can easily be fine tuned by making preci adjustments to the current
through the u of the convenient velocity nsitive encoder dial. This
system, designated 4Q06125PS-430, comes standard in a 19” rack
style cabinet, and is depicted on the cover page of this brochure.
For higher voltage or current, ries and parallel configurations of the
4Q06125PS are available (designated 4Q12125PS-430 and
4Q06250PS-430). For smaller magnets, four quadrant power supply
systems (designated 4Q1005PS-430 and 4Q1010PS-430)
incorporate the smaller Kepco BOP supplies and are offered for
smaller magnet requirements. Specifications for standard AMI four
quadrant systems are outlined below.
Other ratings and configurations are available.
Specifications – Standard Cabinet Mounted Four Quadrant Power Supply Systems System
Maximum
Current
Maximum
Voltage
Output
Power
Maximum
Input Power a
Typical
Noi
Dimensions b
h x w x d
Approximate
Weight c 4Q06125PS-430:    ±125 A ±6 Vdc 750 VA 2000 VA 120 mV p-p 12.5" x 21.0" x 24.5" 100 lb (46 kg)vamp
4Q06250PS-430:    ±250 A  ±6 Vdc 1500 VA3800 VA 120 mV p-p 19.5" x 21.0" x 24.5" 200 lb (91 kg)
4Q12125PS-430:    ±125 A ±12 Vdc 1500 VA3800 VA 240 mV p-p 19.5" x 21.0" x 24.5" 200 lb (91 kg)
4Q1005PS-430:        ±5 A ±10 Vdc    50 VA  700 VA  10 mV p-p 12.5" x 21.0" x 24.5"  85 lb (39 kg)
4Q1010PS-430:      ±10 A ±10 Vdc 100 VA 1200 VA  10 mV p-p 12.5" x 21.0" x 24.5"  85 lb (39 kg)
a Includes Model 430 b
Rack/cabinet dimensions; h = height; w = width; d = depth c Includes rack/cabinet
The Internet Protocol Model 430IP Power Supply Programmer
With no front panel controls  except the power On/Off switch, the Model 430IP is designed for fully functional magnet system control via the rear panel Ethernet connection using TCP/IP with a web browr.
Control can be established through a locally connected computer or remotely through a network or even the Internet; the human/machine interface is a web browr depiction of the Model 430.  This is especially uful for multi-axis systems where a computer is an inherent part of the system. The IP-capable firmware can also be applied to the standard Model 430 with front panel controls – in this ca the computer-displayed Model 430 mirrors and controls all hardware front panel devices with the
exception of the ac input power switch.  The following is a screen-shot of the Model 430IP being controlled with a web browr.
Selecting an AMI Power Supply System
Model 05500PS-430-601 System
Bipolar (Magnet Voltage -5 V 1
to +5 V)
05500PS-430-601
05300PS-430-601
05200PS-430-601
05100PS-430-601
harrowing0 A 100 A 200 A 300 A 400 A 500 A
1
Available for fast discharge of magnet.
Four Quadrant High Current (Magnet Voltage -6 V to +6 V)
4Q06250PS-430
4Q06125PS-430
-300 A -200 A
-100 A 0 A 100 A 200 A 300 A
Four Quadrant High Current (Magnet Voltage -12 V to +12 V)
4Q12125PS-430 4Q12125PS-430
-200 A -100 A 0 A 100 A 200 A
Four Quadrant Low Current (Magnet Voltage -10 V to +10 V)
4Q1010PS-430    4Q06125PS
4Q1005PS-430
-10 A -5 A 0 A    5 A 10 A

本文发布于:2023-07-26 19:36:25,感谢您对本站的认可!

本文链接:https://www.wtabcd.cn/fanwen/fan/78/1118703.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:
相关文章
留言与评论(共有 0 条评论)
   
验证码:
推荐文章
排行榜
Copyright ©2019-2022 Comsenz Inc.Powered by © 专利检索| 网站地图