瑜伽导师培训
Keysight N9320B
RF Spectrum Analyzer
9 kHz to 3.0 GHz
Data Sheet
The spectrum analyzer will meet its
耗材英文specifications when:imfill
It is within its calibration cycle It has been turned on at least 30 minutes. It has been stored at an ambient temperature within the allowed operating range for at least two hours before being turned on; if it has been stored previously at a temperature
range inside the allowed storage range, but outside the allowed operating range.
“Specifications” describe the performance of parameters covered by the product
warranty and apply to the full temperature range of 5 to 45 °C, unless otherwi noted.“Typical” values describe additional product performance information that is not covered by the product warranty. It is performance beyond specifications that 80 percent of the units exhibit with a 95 percent confidence level over the temperature range 20 to 30 °C. Typical performance does not include measurement uncertainty.
“Nominal” values indicate expected performance, or describe product performance that is uful in the application of the product, but are not covered by the product warranty.锅贴儿
Definitions and Conditions
Range
1 Hz to 1 MHz in 1-3-10 quence
—3 dB bandwidth
1. Frequency reference uncertainty = Aging rate x period since adjustment + supply voltage stability + temperature stability.
服诺留学
Frequency and Time Specificationswallowing
Center frequency 50 MHz, RBW 1 kHz, VBW 1 kHz, amplitude scale log, span 100 kHz, sweep time coupled, peak detector, signal at reference level Preamp off ± 0.3 dB Reference level —10 dB, input attenuation 10 dB Preamp on ± 0.4 dB Reference level —30 dB, input attenuation 10 dB
阅览determined
Amplitude Specifications
babelexpiryAmplitude Specifications (continued) Frequency range 1 MHz to 3.0 GHz Gain18 dB nominal
