ACAS Applicator Cleaner Air Supply 雾化器清洗器供气
pACS Applicator Cleaner Solvent Pilot 雾化器清洗器溶剂控制阀
exerci用法
ACS Applicator Cleaner Solvent 雾化器清洗器溶剂
ACVA Applicator Cleaner Vacuum Air 雾化器清洗器真空空气
ACDA Applicator Cleaner Drying Air 雾化器清洗器干燥空气
BEAR Bearing Air 轴承空气
BAO Bearing Air OK 轴承空气正常
BRAKE Brake Air Turbine 涡轮刹车空气
pBW Bell Wash Pilot 旋杯清洗控制阀
BWS Bell Wash Supply lesbians旋杯清洗供应
AIR Color Change Air Supply 不多不少换色空气供应
SOL Color Change Solvent Supply 换色溶剂供应
CP# Color Pilot (#) = Color 颜色控制阀（#）= 颜色
DUMP Dump 排放
DAT Drive Air Turbine 涡轮驱动空气
E-STAT Electrostatics 静电
pIW Injector Wash Pilot 山冈的读音注射器清洗控制阀
IWS Injector Wash Supply 注射器清洗供应
PAINT Paint 油漆
PAP Purge Air Pilot 冲洗空气控制阀
pCC Pilot Color Change 换色控制阀
PCE Process Control Enclosure 工艺控制柜
pDUMP Pilot Dump 排放控制阀
PDP Power Distribution Panel 配电柜
PIE Process Interface Enclosure 工艺接口柜
PREG Pilot Regulator 调节器控制阀
PR# Paint Return (#) = Color sprout油漆回路（#）= 颜色
PS# Paint Supply (#) = Color 油漆进路（#）老友记英文字幕版= 颜色
pPS Purge Solvent Pilot 冲洗溶剂控制阀
pTRIG Pilot Trigger 触发器控制阀
PTS Pilot Trigger Supply 触发器供应控制阀
RP Robot Purge 机器人净化
SA1 Shaping Air (Bell Applicator) 成形空气（旋杯雾化器）
SA2 Shaping Air (Bell Applicator) 英语短语成形空气（旋杯雾化器）
SAP Shaping Air Pilot responsible的用法成形空气控制阀
SAS Shaping Air Supply 成形空气供气
SCC System Control Console 系统控制柜
TDP Turbine Drive Pilot (Bell Applicator) 涡轮驱动控制阀（旋杯雾化器）
TURB Turbine Drive Supply 涡轮驱动供气
Purge System Maintenance
净化系统维护
- Purge System Diagnostics
净化系统诊断
- Purge System Testing andCalibration
quester
净化系统测试和校准
- Purge Cycle Troubleshooting
净化循环排错
• Color Changer Asmbly
换色器组件
- Color Changer Valve Maintenance
换色阀门维护
• SolvAir Module Setup and Maintenance
溶剂空气模块设置和维护
• 3 Valve IK Gear Pump
3阀门1K齿轮泵
- Pump Block Pressure Sensor
泵的压力传感器
• Process Control Maintenance
工艺控制维护
- Fluid Prets Maintenance
流体预设值维护
- E-stat Prets Maintenance
静电预设值维护
- Pret Override Maintenance
强制预设值维护
- Color Change Maintenance
换色维护
• Pepperl & Fuchs ISB Settings
Pepperl & Fuchs ISB设置
• Robot Software Maintenance
机器人软件维护
- I/O Re-configuration
I/O 重新配置
- Robot File Copy
机器人文件复制
- Robot System Variables Editing
Transducer Operations
比例阀的操作
- Shaping Air Control
成形空气的控制
- D/Q Shaping Air Control Module
D/Q 成形空气控制模块
- Turbine Speed Control
涡轮速度控制
- Keyence Digital Fiber Sensor
Keyence 数字光线传感器
• Fluid Calibration - Beaker Method
流体校准 – 量杯的方法
• System Configuration Maintenance
系统配置维护
- System Colors Maintenance
系统颜色维护
- Styles Maintenance
车型维护
- Option Maintenance
选项维护
- PW3 Setup
PW3 设置
机器人系统变量编辑
- Software Archive
软件存档
- Backup a Robot Image
备份一个机器人镜像
thicker
- Restore a Robot Image
恢复一个机器人镜像
• Paintworks III Software Maintenance
Paintworks III软件维护
- Creating a Norton Ghost 2003
Boot Disk Set
创建一个Norton Ghost2003 启
动盘
- Backing Up Your PAINTworks III
GUI
备份你的PAINTworksIII GUI。
- Copying Your Ghost Image Files
to CDs
把你的Ghost 镜像文件复制到
CDs。
- Restoring Your PAINTworks III
GUI
恢复你的PANITworks III GUI。
pAIR PAP Pilot input for Purge Air
净化空气的驱动输入
pSOLV PSP Pilot input for Purge Solvent
净化溶剂的驱动输入
AIR CCAS Purge Air supply input
净化气源输入
SOL CCSS Purge Solvent supply input
净化溶剂供应输入
pCC PCC Pilot for Color Changer operation. When this input is enabled, the
purge air and solvent mixture will be directed to the color changer
manifold as aerated solvent.
换色器操作的驱动。这个输入被激活时，净化空气和溶剂混合物会
直接通向换色器多只管，像充气的溶剂一样。
2T Output 2T Secondary output (ud for Applicator Wash). Solvent or air or the
aerated mixture is always available at this port. If it is not required
in the system, the port must be plugged.
