DISTRIBUTED ENERGY RESOURCES
Tlepis, S., Tentzerakis, S., Lymberopoulos, N., Chaviaropoulos, P., Agoris, D.
Center for Renewable Energy Sources (CRES), 19th km. Marathonos Av., 19009
Pikermi Attikis , Greece, Tel: + 30 210 6603 300 , Fax: + 30 210 6603 301,
e-mail:
Driving forces
赵公元帅The deregulation of the energy markets, environmental concerns (Kyoto Protocol), curity of energy supply and quality of rvices considerations and emerging new technologies are contributing to the shift from centralid to de-centralid power generation, frequently with small-scale cogeneration.
Major opportunities for the development of Distributed Energy Resources (DER) are denly populated urban areas since the demand for power, heating and cooling concentrates there. 80% of the population of Europe, for instance, is indeed accommodated in urban areas where a major part of industrial and business activities is also found. Rural and peripheral regions can also prove to be interesting opportunities for DER.
Distributed generation has many benefits in terms of:
•reduced transmission and distribution loss,
•avoidance of investment cost and of public reaction when building new electricity transport infrastructure
•distributed generation technologies have low investment costs and can be build incrementally to match demand
•potential to u locally available alternative and renewable energy sources •local exploitation of the heat produced for the ca of CHP applications, leading to high efficiencies (75%)
•shorter planning and erection phas
•can be transported to other sites if need aris
There are also some potential drawbacks, including:
•high cost of the kWh for some fuels
•electrical quality issues in terms of voltage and frequency control, reactive power issues四级 时间
•terms for connection to the grid could be still unclear in some countries
Key elements for DER
For many years, power systems were operated in a top-down fashion. Thus, large power generation plants, such as a nuclear plant or a lignite-fired plant for instance, produced most of the power. This kind of generation is often located clo to the required resources such as water for cooling purpos for nuclear plants or a lignite mine in the latter ca. The power is then transmitted to large consumption centres
over long distances and using different high voltage levels. This operating structure was built on the basis of economic facts, curity and quality of supply. This very centralized structure is operated by a hierarchy of control centres, which facilitate the constant monitoring and control of the system. Thus, generation is instantly adjusted to the load of demand (by monitoring the frequency and using well established load forecasting models). The voltage is also controlled to be within specified curity limits by means of appropriate devices, which are usually coordinated (generators, on-line tap changer, reactive compensation devices, etc.)
报偿的意思However, this operating mode is increasingly changing due to technical, economical, social, environmental, and political factors. From the technical viewpoint, there are veral reasons for the changes. Some are listed below:
•Saturation of the existing network and reduction of curity margins, •Geographical and ecological constraints,
•Stability and curity problems (including the need to take expensive preventive measures and the increa of short-circuit currents),
•Continuous demand growth (in the E.U. accession countries, for instance), •Need for investment to sustain the development in the power demand. This development has led to smaller “packets” of investment,
•Privatisation, deregulation and competitive environment of the electricity market, •Emergence of new rational generation technologies with ecological advantages, which can be combined with heat generation.
In this context, we can anticipate the development of decentralid and autonomous generation in m
any countries all over the world. This energy will be produced locally clo to consumption centres and is not intended to be transmitted over long distances. The size of this generation varies from kW to dozens of MW and can be coupled with heat generation and even cooling systems. Such generation is generally connected to distribution systems. Furthermore, it is encouraged by a regulatory framework favourable to co-generation and renewable energy sources as well as by the attractive cost of some equipment and the low cost and flexibility of some primary energy. Distributed resources will introduce tremendous changes to the generation and distribution business, and to its distribution and management. This will require redesign of planning strategies and tools, design methodologies, operations and control of electrical networks. Indeed, the networks were not designed and built to interconnect large amount of distributed resources and the integration of such resources into the grid may have significant conquences on power transfers and hence on the philosophy of the management systems and their robustness.
On the other hand, this kind of power generation through its distributed and local nature has the potential to achieve incread curity of the bulk power system. In fact, traditional power transfers depend heavily on the bulk transmission network. This network can be considered as the weakest link of the chain. A greater penetration of distributed resources into the grid will permit the whole net
work to be less dependent on the bulk transmission network. Therefore constraints such as transmission network congestion, cascading effects and large blackouts will have less
impact on the end ur. Furthermore, it will be possible to redesign grid re-energizing strategies so that the distributed resources can play a major role.
In addition and beyond the distributed resources, the whole distribution network should be redesigned using innovative equipment, more automation, new control and supervisory functions, specific network architectures and intelligent protection systems where information and communication technologies can achieve low costs. Hence, the whole electrical system and its philosophy of planning, design and management is subject to a profound change.
it复数It is urgent to develop DER to arrive at the target of sustainable development and curity of power supply for the next distributed generation electrical network, such that it is able to survive amongst fierce market competition. This requires intelligent interaction between the decentralized grid of the future, new electrical energy technologies including renewable generation and storage devices, smart and lf-adapting power interfaces (conversion), the system operator, the market and, last but not least, the customer. An innovative approach is needed for the planning, design, management an
d operations of distributed power systems of the future with high reliability and quality performance requirements, targeted at creating benefits for the end-ur and for industry competitiveness. Key to this strategy is distributed intelligence, lf-adapting components, a decentralized grid, global piloting, and smart u of Information and Communication Technologies (ICT).
It is anticipated that:
•DER shall become a “normal” profitable business thriving in a competitive market. Currently, DER is introduced through government-level policies and subsidies. Ultimately, however, DER has to stand on its own feet within the market without such measures.
•Exploiting advanced ICT will be the prime mechanism to manage the new grid and its many decentralid players. There is simply no technological way to manage a new and heavily networked power system other than taking advantage of all the new opportunities and capabilities of ICT. This demands a stream of innovations that will be cutting across the traditional boundaries currently parating the power and ICT industry ctors.
•The customer will no longer be a passive “load”, but a pro-active player in the new utility value chain. In today’s power grid, customers are in fact mainly passive end nodes. In the new decentraliz
ed grid, they will be among the many decentralized players and may even help to co-produce the required energy rvices such as demand-side management and load shedding. Customers will have a choice to lect and collaborate with their preferred supplier. So, they will gain the opportunity to be active market players. The future active role of the customer in the decentralized grid operations and energy rvices has to be completely rethought.
The Players
The common types of distributed generation technologies are:
Diel gents. Commonly ud for emergency back-up till today, can now be ud as peaking or ba load units. Power from 50 kW to 6 MW and efficiency of the order of 33% to 40%
NG gents. If a Natural Gas network is available a Natural Gas engine would be suitable for CHP applications. Their power range would cover ranges similar to the diel gent.
Gas Turbines. Commonly ud in industrial applications for power of CHP or as peaking units by utilities. Their power can range from 1 MW to 100 MW and their efficiency from 30% to 40%
Microturbines. A technology that has recently been made commercially available, where the turbine,
compressor and generator are on the same shaft that spins at very high speeds, that can be as high as 120,000 rpm for small units. The power produced is of high frequency and is rectified to 50/60Hz through power electronics. Their power ranges from 25 kW to 500 kW. The electrical efficiency is of the order of 25% and can be incread to an overall efficiency of 80% if the heat is also exploited. Microturbines can be operated on a variety of fuels, like natural gas, propane, diel or kerone. With no or few modifications the microturbines can be operated with low calorific value fuels like landfill bas or biogas.
Fuel cells. In principle, a fuel cell operates like a battery, producing energy in the form of electricity and heat as long as fuel is supplied. A fuel cell consists of two electrodes sandwiched around an electrolyte. Oxygen pass over one electrode and hydrogen over the other, generating electricity, water and heat. The ideal fuel for fuel cells is Hydrogen but some types can operate on gaous fuels (Hydrogen carriers) that are internally reformed into Hydrogen. Fuel cells operate at temperatures that vary between 80 and 1000 o C. Depending on the electrolyte ud, fuel cells can be divided into the following types:
•Proton Exchange Membrane fuel cells: Operate at low temperatures, require high purity Hydrogen, good load following characteristics, suitable for transport applications.
•Alkaline fuel cells : Ud in space applications, requiring pure Hydrogen. •Phosphoric acid fuel cells: Commercially available today for CHP applications running on NG, typical power range 200kW e and 200 kW th.
•Molten carbonate fuel cells: Some prototype units manufactured with power ranging from 250kW to 2MW. High temperature operation.
•Solid Oxide fuel cells: High temperature operation, tolerance in Hydrogen purity, power ranging from 1kW to 250 kW, significant market potential for stationary CHP applications
Renewable Energy Source Technologies. Renewable energy technologies could work in grid-connected mode or as stand-alone units in combination with some energy
奥德曼夏令营
storage device like a battery. Their realisation potential is site specific, depending on resource availability. Such technologies include,
和外国人聊天
•Wind turbines: World market increasing by 25% last year, commercial machines reaching 5MW in capacity and price (installed) dropping below 1000 Euro/kW. •Photovoltaics: Technology that converts direct sunlight into electrical energy, requiring large spaces and having a high cost (6,000 to 10,000 Euro/kW).
大学英语三级真题
•Small Hydro: A mature technology that can be well integrated at the distribution level, with power ranging from a few kW to hundreds of kWs.
•Biomass: boilers or IC engines ud to convert biomass or waste into electricity and heat can be made at a suitable scale for distributed generation.
The Grid
DER has the potential to improve the curity of the bulk power system by limiting congestion, loop flows, high loss, cascading effects and avoiding building new transmission lines. In particular, distributed resources, by their decentralid nature, may significantly improve the reliability of the system as a whole by making power supply less dependent on the bulk transmission network.
However, the prence of a large number of small generation units on the distribution grid leads to technical challenges. Some DER sources (micro-turbines, fuel cells) are easily controllable, and others (wind and solar energy) have a more unpredictable power output. This will require the distribution system to be more flexible and more automated with faster respons. With a high penetration of DER, the distribution grid would remble the transmission systems.mns
Here are a few technical challenges:
•Assuring the balance between production and demand, it will not be possible without the assistance of DER. Consideration is under way in veral European countries on having the distribution system operators (DSOs) provide system rvices to the transmission system operators (TSOs); a high penetration of DER would reinforce this trend and change the way things are done. It will also make economic n for DER to provide system rvices to the distribution system.
•DER will imply bi-directional flows between independent entities that cannot be handled by today’s distribution systems. Protection will have to be redesigned in order to adapt to distributed generators connected to the distribution system. This will require distributed intelligence that will rely heavily on multi–party communications. The architecture and reconfiguration methods may have to be radically changed in order to ensure that the grid is optimally operated. The notions of total black-out and black-restart will probably have to be revid, and the concept of a lf-restored system will need to be introduced.
•The functions of the DSO (flow control, current limitation, voltage control, reactive control, harmonic filtering) may not be able to be fully met by traditional technologies. Combined power electronic and storage technologies will enable cheaper and environmentally friendly alternatives to be provided.
天津国际高中
A high penetration of DER would also mean significant developments in gas infrastructures (including storage) to supply fuel cells, micro-turbines and Stirling
>筷子兄弟 老男孩歌词
