Nikon COOLPIX P6000 ur manual
/file/2587786
< collects and classifies the global product instrunction manuals to help urs access anytime and anywhere, helping urs make better u of products. Home: / Chine: /
This Manual: /file/2587786
shengda
Microscopic
documentation
with
元旦快乐英语the
Nikon
CoolPixP6000 and a microscope adapter“NY-P6000.” Plea refer to this manual for installation and camera ttings.
Main Unit Built-in Relay lens.
Conversion Ring Fits with eyepieceφ30mm.
C-mount adapter Connect to C-mount
＊First, remove lens ring as shown at right. (Rotate counterclockwi)
＊
Screw camera into adapter to install.
★ Installation to microscope on next page
■
φ30ｍｍ conversion ring,
Inrt adapter all the way down the ring. It should fit just right.
■
C-mount adapter,
First, screw C-mount adapter into microscope’s C-mount. Second, inrt main unit (with φ30mm conversion ring) into C-mount adapter and cure with screw on the side.
This Manual: /file/2587786
Installing to Eyepiece
Inrt adapter to eyepiece tube. (remove eyepiece first). If tube’s inside diameter is φ30mm, first install conversion ring to main unit, then slide it into eyepiece. If tube’s inside diameter is φ23.2mm, inrt main unit directly.
宗主国
* Adapter would start rotate when diopter adjusting ring is attached to
eyepiece. In such ca, plea inrt the adapter after turning diopter adjusting ring to either end.
韩国衣服
Nikon F phototube
雅思口语在线练习
Inrt only main unit to Nikon F phototube. Recent Nikon trinocular microscopes are usually equipped with V-T phototube or F-phototube. In old model, Optiphot, Biophot, SMZ-2T trinocular are applicable. If microscope is equipped with 35mm camera or Polaroid system, it is usually same as old model.
※SMZ-10 require optional sleeve. ※
Adapter would start to rotate when diopter adjusting ring is attached to eyepiece. In such ca, plea inrt the adapter after turning diopter adjusting ring to either end.
manageC-mount
C-mount is usually for installing CCD camera which has become trendy nowadays. C-mount has male screw of outer diameter 25.4mm. First, install C-mount adapter into microscope’s C-mount. Second, inrt main unit (with φ30mm conversion ring) into C-mount adapter and cure with screw on the side.
abl*only direct (1.0x) C-mount is compatible. C-mount with lens inside should not be ud.
Olympus PT phototube
PT phototube has outer diameter of φ38mm with curving thread at the top. U-SPT, SZ-PT phototubes are the standards. When 35mm camera or Polaroid system are already installed, it is usually PT phototube. It requires fixation sleeve [NY-BH (option)] to cure adapter to microscope
chance是什么意思JIS phototube
JIS standard of outer diameter φ25mm, and inner diameter Φ23.2mm. Old models of Olympus microscope usually employed this standard. It requires fixation sleeve [NY-JIS (option)] to cure adapter to microscope
*Able to connect without NY-JIS, however the image may come out blurry.
This Manual: /file/2587786
・・・Camera tting for capturing quality image.
■ Main features
※ Plea refer to camera’s ur’s manual for initial tting and basic operation.
○ Easy tting・・・ This is easy mi-auto mode.
・Rotate the MODE DIAL to SCENE. ・Holding down the FUNCTION BUTTON and rotate command dial to LANDSCAPE, Select and press OK. ・Rotate Zoom control to T(right). Zoom up until there will be no vignette.
・Try focus using focus handle of microscope while watching camera’s LCD viewer. There is difference in focus level between the image captured by microscope eyepiece and the image captured by a digital camera. Plea make sure to focus using focus handle of microscope while watching camera’s LCD viewer. ・ ・ ・ Press shutter relea (or remote shutter) to capture the image. Press the Play button. The last picture shot will be displayed in full-frame playback mode. Press EXPOSURE COMPENSATION to alter exposure. Press the multi lect or to adjust exposure.
○ Manual Setting・・If you are unsatisfied with quality of image captured by easy tting, plea try manual tting.
・Rotate the MODE DIAL to M (manual) ・Press FOCUS MODE to display focus menu. U the multi lector to choo [MF], and press OK. ・Focus to ∞ (INFINITE) while pressing MF BUTTON and rotating command dial to the left.
This Manual: /file/2587786
・Rotate Zoom control to T(right). Zoom up until there will be no vignette. ・Rotate COMMAND DIAL while pressing FUNCTION BUTTON to t ISO nsitivity.
＊ISO nsitivity equals to camera’s basic nsitivity. Higher the value, more you will be able to capture images even in darkness. However, when ISO is t higher than 800, noi starts to appear, therefore plea t low level as long as there is no shortage of light.
・Press EXPOSURE COMPENSATION, and lect F/number (aperture) for tting. ・When F/number (aperture) is t at its lowest level, press EXPOSURE COMPENSATION once again, and lect SHUTTER SPEED for tting.
・When SHUTTER SPEED value becomes red, start to rotate COMMAND DIAL until EXPOSURE INDICATOR comes to center (±0)
・Take a picture for test. If image is too bright on the preview, try shortening the shutter speed（-）, if it is too dark try lengthening the shutter speed（+）.
！
Brightness of image depends on following 3 criteria. Plea refer when using manual tting. High・
・・ Low・・・ Long・・・ ISO Aperture（F/#） Shutter speed ・・・Low ・・・High ・・・Short
・When you have wireless remote control (ML-L3), press SELF-TIMER, and lect REMOTE CONTROL, and press OK
・ Using wireless remote or shutter relea, start taking picture once tting is done ・ Press the Play button. The last picture shot will be displayed in full-frame playback mode.
・ Register the tting in mode dial U1 or U2. Once registered, you can shoot with the same tting by just switching to this mode. Press MENU BUTTON. U the multi lector to choo SAVE USER SETTING and press OK.
Other tting・・・Plea refer to Ur’s Manual of P6000 . ・White Balance・・・Manually adjust white balance according to light source. Set it manually when you cannot reproduce color of subject precily becau of the light source. Ur’s Manual P136
2011奥斯卡
This Manual: /file/2587786
heightened
