附录A：外文参考文献及其摘要翻译14篇
TITLE:The Implementing of WCDMA Uplink Simulation by Matlab Simulink AUTHOR:Zhu-cheng
ABSTRACT:Bad on the specification of WCDMA uplink, the Feasibility of system simulation for 3G mobilecommunication system using Matlab software with SIMULINK toolbox on the PC platform is explored. It is convenient by this approach to realize many modules of said 3G system such as frequency-spreading, de-spreading, M.1225 channel, Doppler, channel estimation, RAKE receiver (including Maximum rate combination, strong finger lection) and so on. Complete matrix model description for the ca of single ur with uplink multiple coding channels as well as the procedure of implementing the simulation are also given. Simulation results show that our simulation platform is credible.
题目:WCDMA 系统上行链路层MATLAB 平台SIMULINK 实现
作者:Zhu-cheng
摘要：本文以WCDMA 标准中上行链路结构为蓝本，研究了第三代移动通信系统仿真在PC 机上利用MATLAB 平台的SIMULINK 工具箱实现的可行性。方便地实现了诸如：扩频、M.1225 信道、时变增益
路径（Doppler）、信道估计、RAKE 若干强径选择最大比合并、解扩、判决接收等SIMULINK 模块。给出了上行链路单用户多码道的完整矩阵数学模型和仿真实现过程。仿真结果显示该仿真平台是可靠的。
TITLE: SIMULATION FOR CDMA WIRELESS COMMUNICATION APPLYING MATLAB'S SIMULING FUNCTION,1998
AUTHOR:Man Young Rhee
kinfolk
ABSTRACT:This paper gives a simulation for cdma communication applying Matlab's simulink function,and offer a group of softwave to perform the visualizing simulation,the software perfectly display the advantages and process of normal cdma communication,more over,it provides a softxware ba for further study on cdma communication.
does的用法
题目:WCDMA 系统上行链路层MATLAB 平台SIMULINK 实现
作者:Man Young Rhee
摘要：本文给出了一个基于MATLAB的仿真功能而实现的CDMA通信的仿真系统，并且提供了一套软件来完成可视化仿真，这套软件完美的演示了一般CDMA通信系统的优势和处理过程，更为重要的是
sirrah它为深入研究CDMA通信系统提供了一个软件基础。
TITLE: Prospect and Chine Development Strategies of Future Mobile Communication Systems
AUTHOR:YOU Xiao-hu
ABSTRACT:The developing trends and technical challenge of future mobile communications are summarized in this paper,and development strategies of China's mobile communications are suggested bad on the analysis of developing status of world mobile communications.The characteristics of future mobile communications,such as requirement of data rvice with higher speed,huge variety range of data speed,personalization of IP address and limited wireless spectrum resource,put forward requirements of more advanced metwork,more flexible air interface and mobile terminals.The R&D of 4G has begun in all over the world. In order to develop China's mobile communications,China should grasps the opportunity to begin the R&D of 4G key technologies in time ,and not only develops the force of R&D and outputs IPR,but also spreads the impacts in the world communication field through all sorts of beneficial factors.
散文赏析
题目：未来移动通信系统展望和我国的发展战略
作者:YOU Xiao-hu
摘要：综述了未来移动通信系统的发展趋势及其在技术上所面临的挑战，在分析国内外移动通信发展现状的基础上，指出了我国移动通信领域的发展战略。未来移动通信系统更高量级数据速率的要求、数据速率的大动态变化范围、ＩＰ地址的个人化和有限的频谱资源等诸多方面的特点，要求系统有更加先进的网络、更加灵活高效的空中接口和移动终端等。世界各国已经开始了4Ｇ的研制工作。我
国应该抓住时机，及时开始4Ｇ关键技术的研究，在不断发展科研力量和输出知识产权的基础上，要充分利用各种有利因素，扩大我国在移动通信领域的国际影响，以推动我国未来移动通信事业的发展。
TITLE :On Simulation of DS/CDMA Communication Systems AUTHOR :XU Juan
ABSTRACT:In this paper , the bit-error-rate(BER) performance of the asynchronous direct-quence CDMA(DS/CDMA) multiur system in a wireless radio communications environment characterized by Rayleigh multipath fading channels is investigated. Becau of the system complexity,the BER performance of CDMA systems in such an environment is difficult to asss analytically. Monte-Carlo(MC) simulations can offer an alternative performance evaluation tools. But such an alternative is often is often limited by an excessive computational burden.Importance Sampling(IS) is a variance reduction technique which can significantly reduce the computatinal cost r
equired by MC simulations.This paper will describe the basic principles of IS and the BER of DS/CDMA multiur system in Rayleigh multipath fading channels is simulated using MC method and IS technique respectively.Simulation results indicate that IS results and MC results are in clo agreement and that IS simulation can significantly reduce the computational cost required by MC simulation when the RER is very low.new blash
题目:DS/CDMA通信系统仿真的研究
作者:XU Juan
职位分析
摘要：本文研究了Rayleigh多径衰落信道下的直扩/码分多址(DS/CDMA)多用户系统的误码率。由于系统的复杂性，其误码率很难通过分析获得,Monte-Carlo仿真是一种可代替的性能分析工具。但是,Monte-Carlo仿真经常被过大的计算量所限制。重要抽样技术是一种方差减少技术，它能显著地减少运算时间。本文将描述重要抽样的基本原理，并分别利用Monte-Carlo和重要抽样技术仿真Rayleigh 多径衰落信道下的DS/CDMA多用户系统的误码率。仿真结果表明：重要抽样技术仿真与Monte-Carlo仿真结果吻合得很好，并且在低误码率的场合，与
Monte-Carlo仿真相比，重要抽样技术能显著地降低运算量。英语长篇故事
TITLE:MATLAB WEB SERVER AND ITS APPLICATION IN REMOTE COLLABORATIVE DESIGN OF MAGNETIC BEARING SYSTEMS AUTHOR :ZHAO AIPING
ABSTRACT:Acclimatizing itlf to the development of network ,Math works Inc constructed a MATLAB Web Server environment by dint of which one can brow the calculation and plots of MATLAB through Internet directly .The installation and u of the environment is introduced .A code established on the platform of MATLAB,which deals with the modal analysis of magnetic bearing system(MBS) supporting rotors of five degress of freedom and considering the coupling of thrust bearing with radical bearings is modified to work in the environment. The purpo is to realize a remote call of the code by urs through Internet for the performance analysis of the system.Such an application is very important to the concurrent design of MBS and for the utilization of distributive knowledge acquisition resources in collaborative design.The work on modification and realization is described and the results are discusd.
题目:MATLAB 网络服务器及其有承磁系统的远程协作设计的应用英文转换
作者:ZHAO AIPING
摘要：网络的发展使要它适应新的环境，一些数学著作构造了一种MATLAB 网络服务器的环境能通过
因特网直接的浏览MATLAB 的计算过程。其安装和使用方法将作出介绍。在MATLAB 的平台之上建立的一个代码，处理承磁系统(MBS) 附带对5个自如的旋转体的模型分析，并包括了一对在工作环境中被称作是基本的冲力。其目的是让用户通过因特网为该系统的分析执行实现一个远程的呼叫。这种方法对于MBS的协同设计和在合作领域中所需知识资源的利用是非常重要的。完善和实现以上功能的工作将会被涉及而且结果也会被讨论。
TITLE :NEURAL NETWORK MODELING FOR DYNAMIC PULSED GTAW PROCESS WITH WIRE FILLER BASED ON MATLAB
AUTHOR Zhao Dongbin
七年级上册英语电子书
ABSTRACT:Double-sided weld pool shapes were determined by multiple welding parameters and wire feed parameters during puld GTAW with wire filler. Aiming at such a system with multiple inputs and outputs,an effective modeling method,consisting of the impul signal design,model structure and parameter identification and verification,was developed bad on MATLAB softwave. Then,dynamic neural network models,TDNNM(To pside dynamic neural nerwork model)and BHDNNM(Backside width and to pside height dynamic neural network model),were established to predict double-sided shape parameters of the weld pool.The characteristic relationship of the welding process was simulated and analyzed with the models.
题目：基于MATLAB驱动脉冲GTAW处理程序的中枢网络模型
作者: Zhao Dongbin
摘要：双边的焊圈形状是由在驱动脉冲GTAW程序处理过程中多重焊接参数和充线参数决定的。瞄准拥有如此多样输入和输出的系统，一个有效的基于MATLAB 软件的建模方法, 由脉冲信号所组成，样板的结构及叁数的确认和检验，得到长足的发展。接下来，驱动中枢网络模型，TDNNM(单边驱动中枢网络模型) 和BHDNNM( 背部宽度和高级单边驱动中枢网络模型), 被建立以预测焊圈的双边参变量。我们将对焊接过程的特性关系进行仿真和分析。
TITLE : SIMULATION DESIGN FOR ALL OPTICAL NETWORKS AUTHOR:TangXiaodong
clevererABSTRACT:For specification,design,simulation and optimization of all-optical communication networks,it is esntial to develop aprototype of powerful OCAD(optical computer aided design) software tool. In this paper,it is concluded two kinds of methods to design OCAD for all-optical network:frequency domain analysis(FDA) and temporal domain analysis(TDA). Bad on the SHAONET(Shanghai all-optical network) communication testbed,some initial OCAD design works are prented as examples,which prove to be great uful and efficient for designing and analyzing the performance of all-optical network.
题目：全光网的仿真设计
作者:TangXiaodong
摘要：为了实现所有光学通信网的规格，设计，仿真和优化，发展强大的OCAD(计电子算机辅助设计) 软件工具是至关重要的。在这篇文章中，为所有光网设计OCAD总结了两种方法：频领分析法(FDA) 和时域分析法(TDA)。基于SHAONET(上海全光网络)通信测试，一些初始的OCAD 设计工作作为范例描述, 能够证明对于设计和分析全光网络的执行极其关键和有效。
TITLE: A Matlab Bad Simulation For Hybrid Electric Motorcycle
AUTHOR LI Yong Bin
ABSTRACT:This paper prents a simulation and modeling package bad on Matlab for a parallel hybrid electric motorcycle(HEM).The package consists of veral main detailed models:internal combustion engine(ICE),motor,continuous-ly variable transmission (CVT),battery,energy management system(EMS)etc. Each component is built as a library,and can be connected together according to the parallel HEM's topology.Simulation results,such as ICE power demand,motor power demand,battery instantaneous state-of-charge (SOC) , pollution emissions ets.are given and discusd. Lastly experimental data verify our simulation results.
名称：基于MATLAB的HEM 仿真
作者Li Yong Bin
摘要：这篇文章将描述一种基于MATLAB的针对相同的混合电摩托（HEM）的仿真和建模，这种摩托由一些具体的模型所组成：内部引擎发动机(ICE) ，马达，持续的变换传输(CVT) ，电池，能源管理系统(EMS) 及其他。每个部份像一座图书馆一样被同样地建造, 并且通过相同的HEM技术它们能够被有机的结合起来，例如ICE要求，马达要求，电池的即时控制(SOC) ，污染物等，都有被涉及和讨论。最后实验的数据将查证我们的仿真结果.
TITLE:Simulation for CDMA Wireless Communication Applying MATLAB's SIMULINK Function
AUTHOR :Yang Shihai, Zhou Liangzhu
