Advantages Of Continuous Monitoring
ESD MAT
Push & Clinch Socket Snaps
Location of Push & Clinch
1-5/16"
Snaps on work surface Figure 2. Installation of Push and Clinch Socket Snaps
Figure 3. illustrates how the Monitor is snapped to the worksurface变形金刚2背景音乐
Front View of Mini Monitor
Monitors
Worksurface
Connection大学英语四级考试技巧
Work Surface
Figure 3. Installing the monitor to the worksurface one snap at a time
Note: Install the monitor to the worksurface by
aligning one snap at a time and applying a
downward force directly above that snap. Figure 4. Shows the wiring connection for the Jewel®Workstation Continuous Mini Monitor.
ESD MAT
AC Adapter
Park
Snap
Figure 4. Jewel® Workstation Continuous Mini Monitor
To U The Monitor
1. Plug a wrist strap cord banana plug into the行尸走肉第五季什么时候出
monitored banana jack on the front of the unit. This
automatically activates the lected operator channel. The red operator LED should turn on.
2. Remove the charges from your body by making
contact with a properly grounded ESD worksurface. Snap the cord to the wristband, and fit it snugly onto the wrist. This should silence the audio and cau the LEDs to switch from red to green. If this does not
happen, check the coil cord for continuity or damage. Examine the wrist and cure that it has a cure fit. If you have dry skin, apply an approved dissipative
hand lotion such as Menda 35666 Reztore™ ESD
Hand Lotion. When leaving the area, a person
can take the coil cord along or leave it attached to
the monitor in park position. Alarm will shut off in
approximately 8 conds when operator grounding
cord is removed from unit or will instantly shut off
when cord is parked.baptize
Note: It is recommended that you u the Park Snap
rather than continuously removing the Banana
Plug from its jack. If your process requires the
constant inrtion and removal of the Banana
Plug, plea contact your Desco Reprentative for alternate solutions.
Specifications
托福词汇Test range of monitored circuit 500K - 10M ohms†Worksurface Limit* Set to 500 Megohms
± 20%
Operating Voltage 24VAC, 50-60 Hz
Wrist strap open circuit voltage 1.2 volts peak to peak
@ 1-2 MicroAmps
Mat test open circuit voltage 5 to 7.5 volts Respon time to alarm <50mS
Operating Temperature 32 - 100ºF
Humidity Range: 0-95% RH, non-
condensing
Size 2.77"L x 2.07"W x
.710"H
† This cannot be verified with standard DC test equipment. The continuous monitor is an impedance nsing device and the limits are determined by the magnitude and angle of the impedance.
* Contact factory for special limits.
Note: Worksurface must have a conductive layer such as Dual Layer Rubber or Dissipative 3-Layer
Vinyl or Micastat® Dissipative Laminate with
conductive buried layers. Desco Continuous
Monitors are not recommended for u with
homogeneous matting.Maintenance and Calibration
The Jewel® Workstation Continuous Mini Monitor is solid state and designed to be maintenance free. It
whatsapp是什么is calibrated to NIST traceable standards. There are
modernno ur adjustments necessary. Becau of the wave distortion impedance nsing nature of the test circuit, special equipment is required for calibration. We recom-mend that calibration be performed annually using the Desco 98220 Continuous Monitor Calibration Unit. The Calibration Unit is a most important product which al-lows the customer to perform NIST traceable calibration on cont
inuous monitors. The 98220 is designed to be ud on the shop floor at the workstation, virtually elimi-nating downtime, verifying that the continuous monitor is operating within tolerances. The 98220 provides a simple and quick means to assure compliance verifica-ton Per ANSI/ESD S20.20 Table 3 per ESD TR53. Limited Warranty英语量词
Desco expressly warrants that for a period of one (1) year from the date of purcha Desco Continuous Monitors
will be free of defects in material (parts) and workmanship (labor). Within the warranty period, a credit for purcha
of replacement Desco Continuous Monitors, or, at Desco’s option, the Continuous Monitor will be repaired or replaced free of charge. If product credit is issued, the amount will be calculated by multiplying the unud portion of the expected one year life times the original unit purcha price. Call Customer Service at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for Return Material Authorization (RMA) and proper shipping instructions
and address. Include a copy of your original packing slip, invoice, or other proof of date of purcha. Any unit under warranty should be shipped prepaid to the Desco factory. Warranty replacements will
高级驾驶
take approximately two weeks. If your unit is out of warranty, Desco will quote repair charges necessary to bring your unit up to factory
standards. Call Customer Service at 909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for a Return Material Authorization (RMA) and proper shipping instruc-tions and address.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE
IN LIEU OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND IMPLIED, INCLUDING MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED. The express warranty will not apply to defects or damage due to accidents, neglect, misu, alterations, operator error, or failure to properly maintain, clean or repair products.
Limit of Liability
In no event will Desco or any ller be responsible or liable for any injury, loss or damage, direct or conquent, arising out of the u of or the inability to u the product. Before using, urs shall det
ermine the suitability of the product for their intended u, and urs assume all risk and liability whatsoever in connection therewith.
nmec
分销商库存信息: DESCO
19212
