手机出厂检验标准

更新时间:2023-06-21 12:58:34 阅读: 评论:0

1.      不良分类
2.      抽样方案
Sampling Solution
抽样依据:国标《逐批检查计数抽样程序及抽样表GB2828 ∽2829 – 87》According to: Guo Biao << GB2828 ∽2829 – 87>>
表语是什么
3.      验收标准
3.1  机身外观检验不良判据;
Inspection standard for cosmetic
手机产品表面分类、定义和标准:
The classification, definition or standard of mobile phone surface:
a、表面分类:
surface classification
根据表面等级标准将表面分为“AA”、“A”、“B”、“C”面。
Th e surface will be classified as “AA”, “A”, “B”, “C” according to the surface classification
standard
b、不良等级的定义:
definition of defect level
dr pepper
Level 0. 5              直径为0.005英寸的点
Spot who diameter is 0.005 inch
Level 1              直径为0.0075英寸的点
Spot who diameter is 0.0075 inch
merry christmas 儿歌Level 2            直径为0.01英寸的点(0.25mm)
Spot who diameter is 0.01 inch(0.25mm)
华特 迪士尼
Level 3              直径为0.015英寸的点(0.4mm)
Spot who diameter is 0.015 inch(0.4mm)
nairLevel 4              直径为0.02英寸的点(0. 5mm)
Spot who diameter is 0.02 inch(0.5mm)
Level 5              直径为0.03英寸的点(0.8mm)
Spot who diameter is 0.03 inch(0.8mm)
Level 6              直径为0.04英寸的点(1.0mm)
Spot who diameter is 0.04 inch(1.0mm)
Level 7              直径为0.05英寸的点(1.3mm)
Spot who diameter is 0.05 inch(1.3mm)
C、划痕验收标准
Scratch inspection standard
ITEM width front side back MA MI
LENS SCRA
TCH
0.05
mm
=<
2mm
- - √
0.05
mm
=<
3mm
- - √
KEYP AD
orcaSCRA
TCH
0.08
mm
=<
3mm
- - √
0.08
mm
=<
5mm
- - √
HOU SING
SCRA
TCH
0.08
mm
=< 3.0
mm
=<
5.0mm
=<
5.0mm
√(surface
A)
(surfaceB,
颜色英文
surface
C)
0.1m
m ~
=<
2.0mm
=<
5.0mm
=<
5.0mm
√(surface
A)
(surfaceB,
surface
C)
ANT
SCRA
TCH
0.08
mm
=<
5.0mm
=<
2.0mm
=<
2.0mm
0.1m
m ~
=<
3.0mm
=<
3.0mm
=<
5.0mm
* Definition of Surface A,B,C can be found 6.3.1 d
d、面等级标准:
surface classification standard
如果一个表面有多个不良,那么所有不良的总和来决定此表面不良是否超标。(对于划痕,则把所有划痕的长度相加之和来决定是否超标,对于圆形不良,则其直径和来决定是否超标)
If one surface has more than one defect, the sum of all the defects will determine the final level of defect. (As for the scratch, the sum of defect should be the
total length of all scratches, and as for spot, the sum of defect should be the
sum of diameter of each spot.)
AA面:只显示信息的区域
AA surface: for the area to display information
一个有颜色对比的不良不能超过Level 2(0.25mm)
there is a spot that smaller than the Level 2 (0.25mm)in different color
with the surface
一个同色的不良不能超过Level 3(0.4mm)
there is a spot that smaller than the level 3(0.4mm) in same color with the surface A面:在使用过程中,直接在近处观看且暴露的主要面。
A surface: for the main surface and the surface show directly during using
一个有颜色对比的不良不能超过Level 3(0.4mm)
there is a spot that smaller than the Level 3(0.4mm) in different color  with the surface
一个同色的不良不能超过Level 4(0.5mm)
there is a spot that smaller than the level 4(0.5mm) in same color with the surface
B面:在使用过程中,不直接观看且暴露的次要面。
For the main surface and the surface does not show directly during using
一个不良不能超过Level 5(0.8mm)
there is a spot that smaller than the Level 5 (0.8mm)
C面:在使用过程中看不见的面。
For the surface does not show during using
一个不良不能超过Level 7(1.3mm)
there is a spot that smaller than the Level 7 (1.3mm) 序
N umber 项目
Item星期日英文缩写
检查内容及规格
Content and
specification
不良内容
股份有限公司英文Defect
不良分类
Defect
classify
C
M
A
write过去式M
I
1
机身商
标、规格铭牌、
装饰牌
Brand,
Logo,
ornament
位置、印刷、外观
Position, printing,
outlooking
1、遗漏、错误、贴反、脱落
missing, mistake, wrong
paste, fall off
2、印刷不良、文字不易辨读
bad printing, illegible
character
3、割伤、污损、凸起、浮贴、
倾斜
scratch, blemish, convex,
unstable paste, slant
4、污点一点直径大于0.3mm
以上
blemish N=1,D>0.3 mm
5、污点一点直径于
0.2~0.29mm
blemish N=1,
0.2mm<D<0.29mm
2
机身外
Cosmeti
c
污秽、破损、变色
contamination,damag
e,color deviation
1、污秽(油脂等)在明显处
须用清洁剂方可去除
contamination(such as
grea), removable with detergent

本文发布于:2023-06-21 12:58:34,感谢您对本站的认可!

本文链接:https://www.wtabcd.cn/fanwen/fan/78/1005900.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:表面   抽样   直径   外观
相关文章
留言与评论(共有 0 条评论)
   
验证码:
推荐文章
排行榜
Copyright ©2019-2022 Comsenz Inc.Powered by © 专利检索| 网站地图