IM Relay
The Best Rela y
tion
Slim line AND low profile
2 pole telecom/signal relay, polarized
Through Hole Types (THT), standard version
with 5.08 mm, narrow version with 3.2 mm between the terminal rows or
Surface Mount Type (SMT)
Relay types:non-latching with 1 coil latching with 1 coil
Features
-Telecom/signal relay (dry circuit, test access, ringing)-Slim line10 x 6 mm, 0.39 x 0.24 inch -Low profile 5.65 mm, 0.222 inch -Minimum board-space 60 mm 2-Switching current 2 A
- 2 changeover contacts (2 form C / DPDT)-Bifurcated contacts, gold plated
-High nsitivity results in low nominal power consumption 140 mW for non latching 100 mW for latching version -High surge capability (1.2/50 µs and 10/700 µs) meets Bellcore GR 1089, FCC Part 68 and ITU-T K20³1500 V between open contacts ³ 2500 V between coil and contacts -High mechanical shock resistance up to 300 G functional up to 500 G survival Typical applications:
-Communications equipment
Linecard application – analog, ISDN, xDSL,PABX
Voice over IP -Office and business equipment -Measurement and control equipment -Consumer electronics Set top boxes, HiFi -Medical equipment Options:bang bang 歌词
Surge capability ³ 2500 V between open contacts
Insulation category:
Supplementary insulation according IEC/EN 60950 and UL 1950Working voltage £ 300 Vrms Mains supply voltage SMT: 250 Vrmseof
THT: 200 Vrms
Repetitive peak voltage 2500 V Pollution degree:External: 2
Internal: 1
Flammability classification:V-0Maximum operating temperature:
85°C
CSA-C22.2 No. 14-95 File No. 169679-1079886CSA-C22.2 No. 950-95UL 508 File No. E111441
UL 1950 3rd ed.
QC 160501-CH0001
IEC/EN60950IEC Ref. Cert. No. 1176
CECC 16501-003
THT Version
Mounting hole layout
View onto the component side of the PCB
(top view)
unisonTerminal assignment
Relay - top view Non-latching type,
not energized condition
Dimensions
IM THT IM THT IM SMT IM SMT Standard
Narrow
Gull Wings
J-Legs
mm
inchliberty是什么意思
mm
inch mm
inch
L 10 ±0.080.393 ±0.00310 ±0.080.393 ±0.00310 ±0.080.393 ±0.00310 ±0.080.393 ±0.003W 6 ±0.080.236 ±0.0035.7 ±0.30.224 ±0.0126 ±0.080.236 ±0.0036 ±0.080.236 ±0.003H 5.65 -0.20.222 -0.008 5.85 -0.150.230 -0.0065.65 -0.20.222 -0.0085.65 -0.20.222 -0.008T 3.20.125 3.20.125N/A N/A N/A
N/A
T1N/A
N/A
N/A N/A 7.5 ±0.30.295 ±0.0112.8 ±0.20.110 ±0.007T2 5.08±0.10.200 ±0.0043.2±0.10.126 ±0.0065.
08 ±0.10.200 ±0.0045.08 ±0.10.200 ±0.004D13.2 ±0.150.126 ±0.0063.2 ±0.150.126 ±0.0063.2 ±0.150.126 ±0.0063.2 ±0.150.126 ±0.006D22.2 ±0.150.087 ±0.0062.2 ±0.150.087 ±0.0062.2 ±0.150.087 ±0.0062.2 ±0.150.087 ±0.006Tw 0.4
0.015
0.4
0.0150.40.0150.40.015S 0.3 ±0.05although是什么意思
0.011 ±0.002
0.3 ±0.05
0.011 ±0.002N/A
N/A N/A
N/A
SMT Version
Gull Wings
J Legs
Solder pad layout
View onto the component side of the PCB (top view)
Gull Wings
J Legs
keepgoing
Latching type, 1 coil ret condition
Standard version
Narrow version
Standard version
Narrow version
1.5 1.13 3.40.1514016IM003
2.1 6.80.3014064IM014.5
3.1510.30.45140145IM025 3.511.40.50140178IM036
英语句子翻译器4.2
13.70.60140257IM049 6.320.40.90140574IM05128.427.3 1.201401028IM0624
16.8
45.6
2.40
200
2880
IM07
non-latching 1 coil
latching 1 coil
1.5 1.13 4.1- 1.1310023IM403
2.258.1- 2.2510090IM414.5
3.3812.1- 3.38100203IM425 3.7513.5- 3.75100250IM436
4.516.2- 4.50100360IM449 6.7524.2- 6.75100810IM45129.0032.3- 9.001001440IM4624
功夫熊猫感恩节特辑18.00
41.9
-
18.00
200
2880
IM47
Further coil versions are available on request.
Ambient temperature t amb [°C]
U I =Minimum voltage at 23° C after pre-energizing with nominal voltage without contact current U II =
Maximum continous voltage at 23°
The operating voltage limits U I and U II depend on the temperature according to the formula:U I tamb =K I · U I 23° C
and U II tamb =K Il · U Il 23° C t amb
= Ambient temperature
U I tamb = Minimum voltage at ambient temperature, t amb U II tamb = Maximum voltage at ambient temperature, t amb
江南大学网络教育学院
k I , k II
= Factors (dependent on temperature), e diagram
* High Dielectric Version …C“
All data refers to 23° C unless otherwi specified.
Recommended soldering conditions
Soldering conditions according CECC 00802阿根廷 英文
Vapor Pha Soldering: Temperature/Time Profile (Lead Temperature)Infrared Soldering: Temperature/Time Profile (Lead Temperature)
Time (s)
Time (s)T e m p e r a t u r e °C
T e m p e r a t u r e °C
